Sounds as if TC mentions the right way to go. I temporarily put a single line tank in my 72. Didn't make any accomodation for proper venting. Everytime I opened the gas cap to fill, I got air rapidly being sucked into the tank. Obviously you need some type of venting.
On Sun, 02 Jan 2005 06:30:56 -0600, TC <[EMAIL PROTECTED]> wrote: > Standard single fuel line worked for me I have ----- Original a 72 tank > had radiator shop remove(and solder) the 3 tubes and drill a hole near the > filler tube,( in the tank) install vent tube running up filler neck and back > into it at just below the gas cap and use a vented cap ,then use the single > line sending unit!!!! > Ps this set up is on a el camino > Pss I would not add flame to any tank have a pro do it!!!!!!!!!! > My$.02 Message ----- > From: Stephen Debranch > To: [email protected] > Sent: Sunday, January 02, 2005 12:16 AM > Subject: [Chevelle-list] New Fuel Tank > > > > > > I have a 70 Chevelle and are replacing the fuel tank. Do I need to replace > with the EEC system tank or can I use the 'standard' single fuel line tank? > My car originally had the EEC system but I would like to not re-install it > if I don't have to. Any help will be greatly appreciated. -- Rick Schaefer
