Re: [Chevelle-list] Flyweheels

[Richard M. Pruett]

You might consider using a Dremel tool and cutting a slot into the bolt. Then you could use a screwdriver to back it out. If that doesn't work, you could then go on with your welding.   Rich   On 3/14/2005 8:30:10 PM, chevelle-list@chevelles.net wrote: > Brian, > Thank you for your help.  It is very hevy and is probably about 3/8" thick > or so.  The bolt is broke off smooth with the surface of the block but your > idea with welding a hold shut over top of it sounds like a good plan. > > Thanks again > Ryan