Thanks Fred, No problem with the conversion?
Dan Mascheck -----Original Message----- From: Fred Dowaliby [mailto:[EMAIL PROTECTED] Sent: Saturday, May 14, 2005 10:05 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Power steering Dan, Try Summit, pn SUM-340105. This is a GM Type 2 polished aluminum pump that uses a remote reservoir and hence takes very little room at the pump. I just installed one on my '68/454 and it works and looks great. I used a Zoops polished aluminum bracket and reservoir and the pump mounts low on the driver side. If you are running a stock pump this should work just fine. Fred Dowaliby On May 14, 2005, at 10:34 PM, Dan Mascheck wrote: > I'm still trying to find someone or a company that sells an aluminum > billet > or chrome Saginaw power steering pump for my 1972 Chevelle. The car > has a > 454 engine with an 8-71 BDS Blower with a three groove pulley on the > crank. > I have the AC mounted passenger side low. The alternator passenger side > above. The old Saginaw pump is still in it's stock driver side > position. > > March has a nice billet pump, but said the mounting brackets would not > work. > Flaming River said they had nothing that would fit! > > Does anyone have any ideas! Is anyone running an 8-71 blower on a 454? > > Dan Mascheck > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Saturday, May 14, 2005 1:00 PM > To: [email protected] > Subject: Chevelle-list Digest, Vol 22, Issue 38 > > Send Chevelle-list mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net > or, via email, send a message with subject or body 'help' to > [EMAIL PROTECTED] > > You can reach the person managing the list at > [EMAIL PROTECTED] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Chevelle-list digest..." > > >
