Re: [Chevelle-list] Spark plug wires

[Jim Sullivan]

It looks like it would add extra air (about doubles) with the top being open.  I'll save the info for future ref. Thanks again.   ----- Original Message ----- From: Larry Shouse To: The Chevelle Mailing List Sent: Thursday, May 25, 2006 9:27 AM Subject: Re: [Chevelle-list] Spark plug wires Jim,   Thanks for the kudos. The air cleaner is a combination of a drop down base, a 14x2.5 inch K&N Filtercharger, and the top is a K&N X-stream filter top that is supposed to add 500+ cfm of airflow. I had to go with this combination to overcome my clearance issue in my 66 brought on by the use of the Edelbrock Performer RPM Airgap intake.   Larry Shouse ----- Original Message ----- From: Jim Sullivan To: The Chevelle Mailing List Sent: Thursday, May 25, 2006 9:19 AM Subject: Re: [Chevelle-list] Spark plug wires Larry,  That is beautiful.  I will use it as a guide for mine. Interesting air cleaner.  What is it?? Jim S.   ----- Original Message ----- From: Larry Shouse To: The Chevelle Mailing List Sent: Thursday, May 25, 2006 9:03 AM Subject: Re: [Chevelle-list] Spark plug wires Ditto. I also bought the MSD p/n 35379 for the big blocks which are 8.5mm spiral wound 50 ohm wires with the bendable ends. They are red with gray boots.   As a sidenote about MSD as a company, when I assembled my engine, I took it in to have it dyno'ed. In the process, I lost my coil wire. Not being able to find a suitable replacement at Summit, I called MSD. They sent one out at no charge. Way to go MSD!   Here's a picture of my engine with the wires.   www.fuglybrothers.com/images/engine5-16-06.jpg   Larry Shouse     ----- Original Message ----- From: Devin To: [EMAIL PROTECTED] ; The Chevelle Mailing List Sent: Thursday, May 25, 2006 12:57 AM Subject: Re: [Chevelle-list] Spark plug wires I found that MSD Multi-angle ends worked best with my BB and Hooker headers.  They can each be bent to fit their particular location.   Devin ----- Original Message ----- From: [EMAIL PROTECTED] To: The Chevelle Mailing List Sent: Wednesday, May 24, 2006 8:33 PM Subject: [Chevelle-list] Spark plug wires I've been meaning to ask for a recomendation on wires as well. I have a 69 396SS with Hooker Comp headers and I'm needing to replace the plug wires. Any brands to avoid? 45 degree boots? 135 degree boots?   -----Original Message----- From: [EMAIL PROTECTED] Sent: May 23, 2006 9:05 PM To: Chevelle-list@chevelles.net Subject: Re: [Chevelle-list] (no subject) I bought some of the Taylor 8MM spiral wound wires. Just plain black, with the 45 degree boots. You can get them straight, or 90 degree also. They appear stock, only giveaway is some white writing on them.