I'm on it. I didn't want to waste a lot of time shopping around if someone had some experience along these lines. Thanks guys.
----- Original Message ----- From: "Matthew Post" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" <[email protected]>; "The Chevelle Mailing List" <[email protected]> Sent: Tuesday, June 20, 2006 2:55 PM Subject: Re: [Chevelle-list] '69 Suspension question > I second that vote. I have used them a few times. Always have been > happy and their prices are very reasonable. > > -Matt > > At 11:46 AM 6/20/2006, Clint Hooper wrote: > >I always recommend these over any other spring manufacturer. These people > >are actual spring manufacturers,not spring resellers. > >http://www.coilsprings.com/ The owner owns two A-bodies so he knows these > >cars well. > >Clint Hooper > >H&H Custom,owner > >1969 El Camino protourer > >http://dalesplace.com/misc/friends/clint/clint_hooper.htm > >http://www.lateral-g.net/members/hooper/ > >"You may find me dead one day in a ditch. But by God,you'll find me in a > >pile of brass." > > > >----- Original Message ----- > >From: "Jim Sullivan" <[EMAIL PROTECTED]> > > > > > > > Hi guys. > > > First I want to thank everyone here and at the Team Chevelle forums for > >all > > > safety advice for the front suspension and specifically the springs. I > >have > > > managed to get the front end apart. I am positive I would have ended with > > > some sort of disaster had I not read some of your emails. > > > I am converting from a 307 to a 402 BB and need to replace the springs. > > > While I am at it I am rebuilding the front end. > > > I had some springs that I don't know what they are out of, but they looked > > > just like the ones that were in the car but have a heavier coil. Thought > >I > > > would try to use them, as I need to start saving some money on my precious > > > money pit. > > > When I got the springs out, there is about a two inch heigth difference. > > > (Didn't allow enough for what fits up into the tower) I don't want to > >lower > > > the car that much. Also, now that I see what it is to get these devils > >out, > > > this isn't a job I want to redo because something isn't right. > > > Can anyone suggest someplace where I can get the best price for BB > >springs. > > > I don't need a full suspension package, as I already have the PST poly > >front > > > end rebuild kit. Just going for springs and will need shocks also. > > > Thanks in advance. > > > Jim > >
