I took Clint's recommendation and I have no regrets. I have a 66 with a big block and 4 speed, and everything fits and plays nicely.
Larry Shouse -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Clint Hooper Sent: Friday, October 13, 2006 6:12 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Time to buy headers I installed a set of Sanderson intermediates on my 68 Elky w/BBC and highly recommend them. One thing to watch is that most intermediate headers won't clear the Z-bar. Patriots won't and not sure about Hedmans. Pretty sure the Sandersons will but it wouldn't hurt to ask. My 68 had a built 700R4 and of course my 69 has a Viper T56. Sanderson's SBC intermediates will clear my Z-bar cause I've already asked. Clint Hooper H&H Custom,owner 1969 El Camino protourer http://dalesplace.com/misc/friends/clint/clint_hooper.htm http://www.lateral-g.net/members/hooper/ "You may find me dead one day in a ditch. But by God,you'll find me in a pile of brass." ----- Original Message ----- From: "Michael Pell" <[EMAIL PROTECTED]> > '69 Chevelle, manual trans with stock clutch setup, 454 engine, stock heads. > I have the Hooker comp full length headers now, and they hang way too > low. I'm going to a 'shorty' style header or a 3/4 length so I can have > the exhaust custom built to tuck up closer to the floor board. > I want a set of headers that fit, look nice, are coated to continue to > look nice, etc. > Which headers should I consider? I see lots of choices. > Thanks for any suggestions. > Mike > -- > I would rather live my life as if there is a God, and die to find out there isn't, Than live my > life as if there isn't, And die to find out there is. -Blaise Pascal
