Thanks Brad. I sent you my specs off list. Let me know if i missed anything.Thanks,Dan Solomon For those out there that won't stand behind our Troops...They are always welcome to stand in front of them! http://www.freewebs.com/chevelles1970/
> From: [EMAIL PROTECTED]> To: [email protected]> Date: Fri, 29 Jun > 2007 11:31:45 -0700> Subject: Re: [Chevelle-list] Copy your 402?> > Sure, > send me data and I'll run what I can. Same goes for anyone else, but> if I > get a ton of requests it might be slow. I do have some work to get> done > today before taking people out to wait in line for their iPhone.> > Brad > Waller ([EMAIL PROTECTED])> > '66 Corvette | 327/dead | 4-speed | Wilwood > Brakes | 245/45/16 BFG R1> '67 Chevelle | ex-SS396 | 355/700R4 | F-Body > Brakes | 275/40/17 Kumho MX > > > -----Original Message-----> > From: [EMAIL > PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > Rozanski Joe > (GS/EMP4-NA)> > Sent: Friday, June 29, 2007 10:19 AM> > To: The Chevelle > Mailing List> > Subject: Re: [Chevelle-list] Copy your 402?> > > > Hey Brad,> > > If your interested, I would like you to run some numbers on a > > my > wicked> > 540...> > Thanks> > joe > > > > -----Original Message-----> > From: > [EMAIL PROTECTED]> > [mailto:[EMAIL PROTECTED] On Behalf Of Brad Waller> > > Sent: Friday, June 29, 2007 12:54 PM> > To: 'The Chevelle Mailing List'> > > Subject: Re: [Chevelle-list] Copy your 402?> > > > Pelle,> > > > Which heads > do you have? I can run a Dyno2000 simulation with your> > setup> > and get > some guesses. Give me a "parts list" of the engine builds you> > are> > > thinking of. If you have Cam specs or the actual cam name I > > might have> > > them> > stored already. I took some guesses as to components and > > came up > with a> > 425> > HP combo off the bat. I used what you gave me and assumed > Edelbrock> > Performer heads and a high performance hydraulic lifter cam. > The> > program> > assumed lifts of .504/.479 and the engine is guessed to > have 424HP at> > 5500> > RPM, but torque starts at 411 at 2000 RPM, peaks at > 450 at > > 4000 RPM, and> > drops to 366 by 6000 RPM.> > > > Not an actual > engine to copy, but at least it gives you an > > idea what you> > can> > look > into.> > > > The only 402 file I have is from an engine with a roller cam. > > > It has GM> > Rectangular port "188" heads, a 850 CFM carb with a dual plane > intake,> > small> > tube headers, and Comp XR282HR cam. Numbers are:> > > > > RPM HP TQ> > 2000 168 442> > 2500 218 457> > 3000 268 469> > 3500 322 484> > > 4000 371 487> > 4500 413 481> > 5000 436 458> > 5500 432 412> > 6000 410 359> > > > > Brad Waller ([EMAIL PROTECTED])> > > > '66 Corvette | 327/dead | > 4-speed | Wilwood Brakes | 245/45/16 BFG R1> > '67 Chevelle | ex-SS396 | > 355/700R4 | F-Body Brakes | > > 275/40/17 Kumho MX> > > > > ________________________________> > > > From: [EMAIL PROTECTED]> > > [mailto:[EMAIL PROTECTED] On Behalf Of Pelle> > Andersson> > Sent: Friday, > June 29, 2007 8:35 AM> > To: The Chevelle Mailing List> > Subject: > [Chevelle-list] Copy your 402?> > > > > > Does anyone have a 402 (.060 over) > 2-bolt main with approx> > 400-500> > hp> > which i can copy?> > > > I'm > asking because when i get my block back from the machine> > shop> > I'd like > to get "bolt on" hp without too much> > hassle/experimentation.> > > > Im > planning to raise the comp to 10:1(new pistons), keep the> > original heads, > my> > 800 cfm Holley, my Hooker headers with 2'' primarys and my> > > Edelbrock> > RPM performance Intake.> > > > I know i've been pestering you > guys with this before but I still> > need some ideas/input/advice!> > > > > > > Best regards> > Pelle> > ______________________________> > Chevelle > gearheads> > http://hem.bredband.net/chevellegearheads/> > > http://www.chevelleforum.se/> > > > > > > > > > > >
