Hey Brad, Here are my engine stats, if you need anything else let me know... Merlin 540 cu.in. 14:1 comp 4.500 bore x 4.250 stroke Dart alum. Pro 1 320 heads ported polished and some trick work 2.30 intake 1.88 exhaust valves Crane solid roller cam part #138331 grind #R-280/450-8 Intake lift 765 exhaust lift 765 Intake [EMAIL PROTECTED] 280 exhaust [EMAIL PROTECTED] 280 1.7 Crane Gold roller rockers Crower lifters Dart intake w/1100 Dominator by Pro systems Turbo 400 w/5000 stahl 9in.
Thanks again, joe -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brad Waller Sent: Friday, June 29, 2007 2:32 PM To: 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] Copy your 402? Sure, send me data and I'll run what I can. Same goes for anyone else, but if I get a ton of requests it might be slow. I do have some work to get done today before taking people out to wait in line for their iPhone. Brad Waller ([EMAIL PROTECTED]) '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Rozanski Joe (GS/EMP4-NA) > Sent: Friday, June 29, 2007 10:19 AM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] Copy your 402? > > Hey Brad, > If your interested, I would like you to run some numbers on a > my wicked > 540... > Thanks > joe > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Brad Waller > Sent: Friday, June 29, 2007 12:54 PM > To: 'The Chevelle Mailing List' > Subject: Re: [Chevelle-list] Copy your 402? > > Pelle, > > Which heads do you have? I can run a Dyno2000 simulation with your > setup > and get some guesses. Give me a "parts list" of the engine builds you > are > thinking of. If you have Cam specs or the actual cam name I > might have > them > stored already. I took some guesses as to components and > came up with a > 425 > HP combo off the bat. I used what you gave me and assumed Edelbrock > Performer heads and a high performance hydraulic lifter cam. The > program > assumed lifts of .504/.479 and the engine is guessed to have 424HP at > 5500 > RPM, but torque starts at 411 at 2000 RPM, peaks at 450 at > 4000 RPM, and > drops to 366 by 6000 RPM. > > Not an actual engine to copy, but at least it gives you an > idea what you > can > look into. > > The only 402 file I have is from an engine with a roller cam. > It has GM > Rectangular port "188" heads, a 850 CFM carb with a dual plane intake, > small > tube headers, and Comp XR282HR cam. Numbers are: > > RPM HP TQ > 2000 168 442 > 2500 218 457 > 3000 268 469 > 3500 322 484 > 4000 371 487 > 4500 413 481 > 5000 436 458 > 5500 432 412 > 6000 410 359 > > Brad Waller ([EMAIL PROTECTED]) > > '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 > '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | > 275/40/17 Kumho MX > > ________________________________ > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Pelle > Andersson > Sent: Friday, June 29, 2007 8:35 AM > To: The Chevelle Mailing List > Subject: [Chevelle-list] Copy your 402? > > > Does anyone have a 402 (.060 over) 2-bolt main with approx > 400-500 > hp > which i can copy? > > I'm asking because when i get my block back from the machine > shop > I'd like to get "bolt on" hp without too much > hassle/experimentation. > > Im planning to raise the comp to 10:1(new pistons), keep the > original heads, my > 800 cfm Holley, my Hooker headers with 2'' primarys and my > Edelbrock > RPM performance Intake. > > I know i've been pestering you guys with this before but I still > need some ideas/input/advice! > > > Best regards > Pelle > ______________________________ > Chevelle gearheads > http://hem.bredband.net/chevellegearheads/ > http://www.chevelleforum.se/ > > > > >
