In a message dated 8/22/2007 9:56:01 AM Central Daylight Time, [EMAIL PROTECTED] writes:
> I am looking for some guidance on replacing the package tray on my 69 SS. > I have the new one as well as new insulation for underneath. Any guidance on > making this job as easy as possible is greatly appreciated. At this time I > will not be installing any rear speakers, if that makes a difference. > > > > Thanks in advance! > > > > Frank Gondermann > > its been a little while since i did this but i think you need to remove the back seat, and as you are installing the shelf , you need to bend it up slightly in the middle to get it to go in, and then once its almost in then of course push it flat and under the metal part along the bottom of the rear window, you may also have corner pieces you need to remove first before starting. not sure if your headliner c-pillar covers are going to get in your way- but most of them pop in place with some clips similar to the door panels- you may have to remove them so no scuffing occurs, then on the edge towards the seat you will need to glue that down with some spray 3M adhesive, do both sides- and clean the metal part off good so the glue sticks- i think you wait like 2- min for the glue to become tacky before you stick it. : ) ************************************** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour
