There is two different rod lengths that go between the booster and master.?sounds like yah have the longer one in there. The master should slide onto that booster with ease...not forcing it on there.
-----Original Message----- From: [EMAIL PROTECTED] To: [email protected] Sent: Thu, 6 Mar 2008 11:22 am Subject: [Chevelle-list] master brake cylinder Hi guys well the list is pretty slow but I am in the process of replacing the master cylinder on my 70 and have a question for ya. I had a round style that was on the car with the bleeder screws in it. It was pretty much a waste so I got the square style with out bleeder screws that I believe to be the original style that came on the car. After a bench bleed I installed it on the booster and I had to really force it on. My question is is this normal or is the rod in the booster a different length for the round and square styles of cylinders?After I mounted the cylinder it seemed the brake pedal only had a very little travel and the cylinder felt as if it was bottoming out. Can ya all help as you all seem to always come thru?? Thanks so much? Steve Supercharge your AIM. Get the AIM toolbar for your browser.
