Jim, Thanks for the reply. I installed the factory image and then programmed with the "uploaded" file attached. I can modify the menu items now, but it does not take properly. Specifically, in Work Mode settings, I am programming 2m calling and 70c calling for A and B.
As you can see in the "downloaded" file attached, it takes programming for work mode settings of C and D without issue, but keeps changing A and B to channel 0/N5TEN on the display, even though that is not what I am uploading AND it changes them both in the work mode setting to channels that I do not even have programmed so that doesn't even match the displayed channels. I've never had issues with this or any of the other BTech stuff, or with CHIRP. Thank you!!! -Darby On Sun, Nov 24, 2019 at 3:22 PM Jim Unroe <[email protected]> wrote: > > > On Sun, Nov 24, 2019, 4:16 PM Darby Collier <[email protected]> > wrote: > >> Trying to program Uv50X2 and since this last update, it will not offer >> the option to set any of the menu items anymore such as scanning options >> etc. It will take the programming of channels and names but does not offer >> any menu options. Then when I revert to an old img file, it does not >> recognized the menu items that are in place from before so the channels I >> program via work mode do not program. I've tried doing a reset of both >> "ALL" and "VFO" only via the onboard menu but it still is not doing a hard >> factory reset. Help!!!! >> > > Hi Darby, > > Your radio has flipped a bit in memory that has caused 1or more settings > to be out-of-range. > > Email a CHIRP Radio Images (*.img) to me or attach it here and I will > correct it and send it back to you. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to DarbyInGreen at [email protected] > To unsubscribe, send an email to > [email protected]
UPLOADED.img
Description: Binary data
DOWNLOADED.img
Description: Binary data
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
