I will try again. I’ve done it 10 times now with the same result. I’ll try the factory file again and then enter each channel manually instead of importing this time as well. Thanks.
On Sun, Nov 24, 2019 at 17:35 Jim Unroe <[email protected]> wrote: > On Sun, Nov 24, 2019 at 8:21 PM Darby Collier <[email protected]> > wrote: > > > > Exactly > > > > On Sun, Nov 24, 2019 at 17:17 Jim Unroe <[email protected]> wrote: > >> > >> On Sun, Nov 24, 2019 at 7:25 PM Darby Collier <[email protected]> > wrote: > >> > > >> > Jim, > >> > > >> > Thanks for the reply. I installed the factory image and then > programmed with the "uploaded" file attached. I can modify the menu items > now, but it does not take properly. Specifically, in Work Mode settings, I > am programming 2m calling and 70c calling for A and B. > >> > > >> > As you can see in the "downloaded" file attached, it takes > programming for work mode settings of C and D without issue, but keeps > changing A and B to channel 0/N5TEN on the display, even though that is not > what I am uploading AND it changes them both in the work mode setting to > channels that I do not even have programmed so that doesn't even match the > displayed channels. I've never had issues with this or any of the other > BTech stuff, or with CHIRP. Thank you!!! > >> > > >> > -Darby > >> > > >> > >> Darby, > >> > >> I don't think I understand the problem with the 2 files. Are you > >> saying you uploaded the UPLOADED.img file and then with no changes to > >> the radio downloaded from it and got DOWNLOADED.img? > >> > >> Jim KC9HI > > > Darby, > > The problem with MR A channel: and MR B channel: in Workmode is that > they are both set to channels that are not programmed. They are set to > 191 and 144 respectively but they need to be in the range of 0 to 98 > inclusive to select a valid memory channel. > > Someone or something cut memory row 4 and moved it "up" to memory row > 0 moving the memory rows 0 through 3 each "down" a row to rows 1 > through 4. Are you sure that is not something you may have did by > accident? > > Would you perform the upload followed by and immediate download again > to see if files are different a second time? > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to DarbyInGreen at [email protected] > To unsubscribe, send an email to > [email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
