Sorry set them both to ch 15, or to two other valid channels? Also thank you for your Elmers patience.
On Sun, Nov 24, 2019 at 18:59 Jim Unroe <[email protected]> wrote: > On Sun, Nov 24, 2019 at 9:17 PM Darby Collier <[email protected]> > wrote: > > > > Okay Jim, > > > > I did a factory upload from the stock image. > > > > Then I uploaded the "Uploaded" image attached. I did not touch the > radio at all, then within less than a minute, downloaded the attached > "Downloaded" image. As you can see, the radio once again changed the > programming with no input from me. I'm at a loss. Should I try the same > thing with the stock image and see if it changes that as well? > > > > Darby, > > There is no point to uploading the "stock" image if you follow it up > by another image. The last image uploaded "wins". > > Anyway it seems that the radio have some bits stuck in its memory. > After you uploaded your UPLOADED.img file setting MR A channel: to 0 > (0x0E9F = 0x00) and MR B channel: to 1 (0x0EA0 = 0x01) they come back > to CHIRP as being set to 191 (0xBF) and 144 (0x90). > > What I would like you to try now would but to upload you UPLOADED.img > file and then manually set MR A channel: and MR B channel: to some > other valid channels numbers and then download from the radio and send > that to me to see what they come back as. Set them both to channel 15. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to DarbyInGreen at [email protected] > To unsubscribe, send an email to > [email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
