On the baofeng 888 model and that happens when the "battery saver" option is enabled. See if your radio has that and if it is turned on.
Tony ________________________________ From: [email protected] <[email protected]> on behalf of David <[email protected]> Sent: Sunday, March 29, 2020 5:25:00 PM To: [email protected] <[email protected]> Subject: Re: [chirp_users] Baofeng UV-5RA I am using a UV-5RA and it has about a sec delay before I hear the other person talk is this normal or is there a setting someplace that I can change? A real pain as it cuts off the other persons one or 2 first words. Thanks On 3/29/2020 4:27 PM, Joel Leland wrote: Scroll to the bottom of the ports listing and use USB0. Worked for me with a similar issue. On Sun, Mar 29, 2020, 16:11 <[email protected]<mailto:[email protected]>> wrote: I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios. Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10. When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio. Looking for troubleshooting ideas. Dick W4RSS _______________________________________________ chirp_users mailing list [email protected]<mailto:[email protected]> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at [email protected]<mailto:[email protected]> To unsubscribe, send an email to [email protected]<mailto:[email protected]> _______________________________________________ chirp_users mailing list [email protected]<mailto:[email protected]> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dave at [email protected]<mailto:[email protected]> To unsubscribe, send an email to [email protected]<mailto:[email protected]>
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
