Is it on a repeater?
Since a lot of repeaters are using a digital tie-in, they are often delayed
when it is actively linked.
Glenn
----- Original Message -----
From: David
To: [email protected]
Sent: Sunday, March 29, 2020 5:25 PM
Subject: Re: [chirp_users] Baofeng UV-5RA
I am using a UV-5RA and it has about a sec delay before I hear the other
person talk is this normal or is there a setting someplace that I can change? A
real pain as it cuts off the other persons one or 2 first words.
Thanks
On 3/29/2020 4:27 PM, Joel Leland wrote:
Scroll to the bottom of the ports listing and use USB0. Worked for me with
a similar issue.
On Sun, Mar 29, 2020, 16:11 <[email protected]> wrote:
I hauled out my FT-7100 and thought I'd give CHIRP a try for
programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the radio. I'm
using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in
on port 10.
When trying to upload a newly edited copy of an old .eep file, I
eventually receive a message that says it can't connect to the radio.
Looking for troubleshooting ideas.
Dick
W4RSS
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Joel at [email protected]
To unsubscribe, send an email to
[email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dave at [email protected]
To unsubscribe, send an email to [email protected]
------------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at [email protected]
To unsubscribe, send an email to
[email protected]_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
