Nope no repeater.
David
On 3/29/2020 5:39 PM, Glenn K0LNY wrote:
Is it on a repeater?
Since a lot of repeaters are using a digital tie-in, they are often
delayed when it is actively linked.
Glenn
----- Original Message -----
*From:* David <mailto:[email protected]>
*To:* [email protected]
<mailto:[email protected]>
*Sent:* Sunday, March 29, 2020 5:25 PM
*Subject:* Re: [chirp_users] Baofeng UV-5RA
I am using a UV-5RA and it has about a sec delay before I hear the
other person talk is this normal or is there a setting someplace
that I can change? A real pain as it cuts off the other persons
one or 2 first words.
Thanks
On 3/29/2020 4:27 PM, Joel Leland wrote:
Scroll to the bottom of the ports listing and use USB0. Worked
for me with a similar issue.
On Sun, Mar 29, 2020, 16:11 <[email protected]
<mailto:[email protected]>> wrote:
I hauled out my FT-7100 and thought I'd give CHIRP a try for
programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the
radio. I'm
using a Tripp-Lite USB to Serial adapter and my Win10 machine
shows in
on port 10.
When trying to upload a newly edited copy of an old .eep file, I
eventually receive a message that says it can't connect to
the radio.
Looking for troubleshooting ideas.
Dick
W4RSS
_______________________________________________
chirp_users mailing list
[email protected]
<mailto:[email protected]>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Joel at [email protected]
<mailto:[email protected]>
To unsubscribe, send an email to
[email protected]
<mailto:[email protected]>
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dave [email protected]
To unsubscribe, send an email
[email protected]
------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at [email protected]
To unsubscribe, send an email to
[email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dave at [email protected]
To unsubscribe, send an email to [email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
