Tried beveling the edges, no change. Thanks
> On August 23, 2020 at 3:08 PM Don Goodrich <[email protected]> wrote: > > 1st the volume level has no effect on data transfer... > > Sometimes a little plastic shaving is needed. Shave carefuly a little > off the plastic shroud around the cable male connector where it plugs into > the radio as it interferes with the radio's case prventing the connector from > solidly seating. This may be the issue here... > > Don Goodrich > [email protected] > AF7DG > > > > > Sent: Sunday, August 23, 2020 at 2:55 PM > From: "Charles Gierke" <[email protected]> > To: "Discussion of CHIRP" <[email protected]>, "Alan > Hill" <[email protected]> > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating > > NO luck yet. I held the plug in as far as it would go, no change. I > turned the volume up all the way, no luck. I closed CHIRP and re-opened as > Administrator,still no luck up or downloading. > > thanks for your assistance > > > > > On August 22, 2020 at 4:11 PM Alan Hill <[email protected]> > wrote: > > > > Try making sure you vigorously plug the connector into the radio > > and hold it in while loading from chirp. Also turn the volume up from > > minimum. Last resort run chirp as adminstrator. > > > > > > On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < [email protected] > > mailto:[email protected] > wrote: > > > > > > > > > > On Wednesday my 2 BaoFeng UV 5R radios could download and > > > upload to CHIRP. > > > > > > On Friday all I got was the following message: Radio Did > > > Not Respond. > > > > > > I tried reloading the latest version of CHIRP, no change. > > > I tried an earlier version of CHIRP, no change. I reloaded the latest > > > version back, no change. Visually the radio's red light blinks then the > > > LED display blinks then the error message shows up on CHIRP. > > > > > > > > > > > > Any suggestions? > > > > > > Thanks Chuck KJ7INT > > > > > > _______________________________________________ > > > chirp_users mailing list > > > [email protected] > > > mailto:[email protected] > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Silver Fox at > > > [email protected] mailto:[email protected] > > > To unsubscribe, send an email to > > > [email protected] > > > mailto:[email protected] > > > > > > > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Chuck at [email protected] > > To unsubscribe, send an email to > > [email protected] > > > > > _______________________________________________ chirp_users > > mailing list [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was > > sent to Don Goodrich at [email protected] To unsubscribe, send an > > email to [email protected] > > > _______________________________________________ chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was > sent to Chuck at [email protected] To unsubscribe, send an email to > [email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
