Did you check Windows Device Manager to see if your cable shows to be a Prolific cable? If it is, try rolling your driver back to 3.2.0.0. Check www.miklor.com for info. Check under Drivers.
Jardy Dawson WA7JRD Message sent by....Oh look!! Pretty lights!! > On Aug 23, 2020, at 08:24, Gary A. Cox <[email protected]> wrote: > > Charles, > I have never gotten my radios to sync either and Finely gave up. > I even bought 2 cables thinking it was a cable I followed all the > instructions just like you. > If you succeed, please email me back > > Gary A Cox > Sent from my iPhone > >>> On Aug 22, 2020, at 4:12 PM, Alan Hill <[email protected]> wrote: >>> >> >> Try making sure you vigorously plug the connector into the radio and hold it >> in while loading from chirp. Also turn the volume up from minimum. Last >> resort run chirp as adminstrator. >> >> >>> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke <[email protected]> wrote: >>> On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. >>> >>> On Friday all I got was the following message: Radio Did Not Respond. >>> >>> I tried reloading the latest version of CHIRP, no change. I tried an >>> earlier version of CHIRP, no change. I reloaded the latest version back, no >>> change. Visually the radio's red light blinks then the LED display blinks >>> then the error message shows up on CHIRP. >>> >>> >>> >>> Any suggestions? >>> >>> Thanks Chuck KJ7INT >>> >>> _______________________________________________ >>> chirp_users mailing list >>> [email protected] >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Silver Fox at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Gary at [email protected] >> To unsubscribe, send an email to >> [email protected] > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at [email protected] > To unsubscribe, send an email to > [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
