Opened Device Manager, Ports (COM & LPT) "USB-SERIAL CH340(COM3)" I've always used COM 3 and it worked fine until last Wednesday.
> On August 24, 2020 at 5:48 PM Glenn K0LNY <[email protected]> wrote: > > Chuck, > Have you tried the following? > open device manager, and seeing which com ports show, and then unplug the > cable, and see which one disappears, so you can select that port in Chirp. > HTH. > > Glenn > > ----- Original Message ----- > From: Charles Gierke mailto:[email protected] > To: Discussion of CHIRP mailto:[email protected] ; > Silverfox mailto:[email protected] ; John LaMartina mailto:[email protected] > Sent: Monday, August 24, 2020 7:43 PM > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating > > thanks for the suggestion. Unfortunately, no luck. > > Chuck > > > > > On August 23, 2020 at 4:26 PM Silverfox < [email protected] > mailto:[email protected] > wrote: > > > > > > I forgot that you are on Windows. The windows OS is very poor > > supporting USB. You might try going into the device manager and tell it to > > show hidden devices. Once that is done, look at the USB entries and delete > > all of them that are diminished icons. That is, they are lighter than the > > other icons. > > > > Good luck. > > > > Alan > > > > > > > > From: [email protected] > > mailto:[email protected] > > [mailto:[email protected]] On Behalf Of Charles > > Gierke > > Sent: Sunday, August 23, 2020 3:05 PM > > To: Discussion of CHIRP; John LaMartina > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating > > > > > > > > hi, still no luck. > > I went to the web site and put a death-grip on the plug and held it > > in as far as it would go. I trimmed a hair of the edges of the plug to let > > it seat on the bottom. > > > > thanks for the suggestions > > > > <!--[endif]--> > > > > On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> wrote: > > > > This may assist. > > > > Www.Miklor.com/COM/UV_ErrorMess.php > > > > > > > > John > > > > Www.Miklor.com/UV5R > > > > > > > > > > <!--[endif]--> > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> wrote: > > > > > > > > > > > > > > > > On Wednesday my 2 BaoFeng UV 5R radios could download and > > > upload to CHIRP. > > > > > > On Friday all I got was the following message: Radio Did Not > > > Respond. > > > > > > I tried reloading the latest version of CHIRP, no change. I > > > tried an earlier version of CHIRP, no change. I reloaded the latest > > > version back, no change. Visually the radio's red light blinks then the > > > LED display blinks then the error message shows up on CHIRP. > > > > > > > > > > > > Any suggestions? > > > > > > Thanks Chuck KJ7INT > > > > > > _______________________________________________ > > > chirp_users mailing list > > > [email protected] > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to John LaMartina at [email protected] > > > To unsubscribe, send an email to > > > [email protected] > > > > > > > > > > > > > > > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Chuck at [email protected] > > To unsubscribe, send an email to > > [email protected] > > > > > > > > > > > > > > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Chuck at [email protected] > > To unsubscribe, send an email to > > [email protected] > > > > > > > > --------------------------------------------- > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Glenn at [email protected] > To unsubscribe, send an email to > [email protected] > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Chuck at [email protected] > To unsubscribe, send an email to > [email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
