Kevin, There is a setting the the radio that is out-of-range which is confusing CHIRP and causing the settings tabs to not appear. The issue recently is that the TXP setting in one or both VFO is out-of-range. If this is the case for you, a quick and dirty fix is to switch the radio to VFO mode and temporarily set menu 2 (TXP) to MID in both VFOs. Then download from your radio to see if the "Settings" tab appears. If not, you can email your CHIRP Radio Images (*.img) file to me and I can correct the invalid setting(s) and return the "repaired" image to you.
Jim KC9HI On Sun, Dec 20, 2020 at 4:34 PM Kevin Evans <[email protected]> wrote: > > I tried the steps in the previously closed solution of downloading the file > and using the Settings tab, then change the setting for VFO. However, I > don't have anything under the "settings" tab. I do find VFOA and VFOB under > the "browse"r tab on the left, which is under the blank "Settings" tab, but I > don't have any info on what to put in Hex, Dec, Bin cells or which ones to > use or not use. Any assistance would be appreciated > > Kevin > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jim at [email protected] > To unsubscribe, send an email to > [email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
