That function was turned off. It didn't work. So I was trying to get it to work. Now it works. Although I'm now having issues trying to upload all my frequencies
On Sun, Dec 20, 2020 at 2:52 PM Jim Unroe <[email protected]> wrote: > On Sun, Dec 20, 2020 at 5:36 PM Kevin Evans <[email protected]> wrote: > > > > Thank you, Jim, > > > > I got lucky by putting "1" in every cell and that allowed it to change > from channel mode to frequency mode. > > I don't understand why you needed to do this. Switching between VFO > mode and MR mode is accomplished by powering off the radio then > pressing and holding the [MENU] button while powering the radio back > on -and- continue holding the [MENU] button until the radio fully > boots. If you let off too soon, the switch between modes will not > occur. If you have "VOICE" enabled, once you hear the "frequency mode" > or "channel mode" voice prompt, you can let go. > > > > > I'm having issues though trying to load all of my frequencies into the > csv file. I followed the instructions to the letter but perhaps I'm > putting in invalid data in the file? I only have the freqs and no other > data as far as tone and dtcs codes and whatnot. and chirp says it can't > find any frequencies and doesn't open the csv file. Is there something > else I should be doing? > > You cannot just create a random CSV file and load it into CHIRP. It > must be in the proper format so CHIRP can understand what is being > read in. Program one or more channels using the "spreadsheet style > memory editor". If you wish you can import them from any of the "stock > config" files, one or more of the "data sources" and/or the a test > "image" file from the CHIRP repository. Once you have a few channels, > then export them to a CSV file. Use this CSV file as a template for > how the channels that you add should look like. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Kevin at [email protected] > To unsubscribe, send an email to > [email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
