thank you! On Sun, Dec 20, 2020 at 3:49 PM Jim Unroe <[email protected]> wrote:
> On Sun, Dec 20, 2020 at 6:06 PM Kevin Evans <[email protected]> wrote: > > > > That function was turned off. It didn't work. So I was trying to get it > to work. Now it works. Although I'm now having issues trying to upload > all my frequencies > > > > Ahhh... yes. VFO/MR switching is disabled from the factory. A side > effect of the firmware being cloned from the UV-82C which requires > preventing access to the VFO for FCC Part 90 compliance. > > You aren't trying to upload a CSV file directly into the UV-82HP, are > you? You cannot directly upload a CSV file to any radio that is > programmed by CHIRP using "clone mode". You must download from the > radio, import the channels from the CSV file (or load the CSV file > into a separate tab so you can copy-and-paste them into the tab from > your radio) and then upload the tab from your radio back into your > radio. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Kevin at [email protected] > To unsubscribe, send an email to > [email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
