I buy a Logitech K400 which has a touchpad on it for about $20 at Walmart or other places that sell them. I either use a repurposed TV or go to the local IT recycler and get me a monitor for $5-$10. You do not need that much SD card for Chirp so that will cost less than $10. So far I still am not near $100. Part of being a ham is learning to scrounge. Part of running a RPi is also learning to scrounge. For travel I carry a RPi the keyboard and an HDMI cable and use the HDMI port on the TV in the hotel.
On Tue, Jan 25, 2022 at 12:46 AM Ken Hansen <[email protected]> wrote: > You need to add a screen, a mouse, a power supply, and an SD card. > > The screen can get pricey pretty fast - money saved by buying a smaller > screen will soon be spent on a pair of 'readers' to use the smaller screen. > > I'm a big fan of RPi, but people like to gloss over the actual cost of > such a setup. > > An RPi 400 (Pi in a keyboard) setup can easily run $100 + monitor, cheaper > than a new laptop, but pretty close to low-end, off-lease corporate laptops. > > Ken, N2VIP > > > On Jan 24, 2022, at 10:00, Chuck Hast <[email protected]> wrote: > > > > And for the price > > of a RPi 400 you just need to add a screen and you > > are off to the races... > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Chuck Hast at [email protected] > To unsubscribe, send an email to > [email protected] > -- Chuck -- KP4DJT HamHotline # 11259
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
