пн, 8 янв. 2024 г., 23:50 Terje J. Hanssen <terjejhans...@gmail.com>:
> > > Den 08.01.2024 20:54, skrev Andrea paz: > > I created a bd.m2ts file by putting "HDV 1080i/25" as the preset. > > I think there possibly is a fault in the "HDV 1080i/25" preset (mixed > with the (FHD) "1080i/25 preset" as mentioned in another post today: > https://lists.cinelerra-gg.org/pipermail/cin/2024-January/007628.html > > > Bd-render worked until the renderig was complete then CinGG shut down > > (I don't have a BD-burner). Doing ffprobe on this video I get: > > > > Input #0, mpegts, from 'bd.m2ts': > > Duration: 00:01:06.91, start: 0.074667, bitrate: 10242 kb/s > > Program 1 > > Stream #0:0[0x1011]: Video: h264 (High) ([27][0][0][0] / 0x001B), > > yuv420p(tv, bt709, top first), 1440x1080 [SAR 1:1 DAR 4:3], 25 fps, 25 > > tbr, 90k tbn > > Stream #0:1[0x1100](ita): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, > > stereo, fltp, 192 kb/s > > > > The video is slightly stretched and reduced to 4:3 from the original > > 16:9. By applying the downsample filter and setting H and V to 40 the > > pixels become clearly visible and can be seen to be square.(cfr > > http://www.g-raffa.eu/Cinelerra/HOWTO/anamorphic.html) > > > > In postimage, I have uploaded several screenshots showing the > > "info--details" of the three original sources that make up the video, > > of the bd.m2ts (hdv.jpeg) file, and also of how the "set format" is > > automatically set. > > [@Andrew, is it possible to put PAR and DAR in the Set Format window > > as shown in the image?] > > > > Note: If I force, in Set Format, the aspect ratio (DAR) to 16:9 I get, > > with the downsample filter, rectangular pixels. But the video is no > > longer deformed.... > Yes, I am also curious, because I tried to set the parameters manually > and then rendered to webm, but still 4:3 format on stored file icon and > displayed in VLC. I got a feeling that manual changing W Rate to 1.3333 > didn't really work and was changed back to 1.000. Can really Canvas > Width/Height, W Rate/H Rate and Aspect Ratio in Set> Format be user > defined independently? > (display) aspect ratio surely set as part of "profile" see cinelerra/defaultformats.h W rate/H rate seems to be purely informational, as in you can set user preset and then manually change dimensions/aspect rate and it will show .. not exactly rate as num/den, but more like width multiplier / height multiplier. So, you enter NOT 4 and 3 there (it will make cannas 4*1440 width, 1080 * 3 height!) but 1.3333 and 1.0 to see dimensions go fullHD. or set fullhd from dropdown menu and see ratio go to 1.333/1.0 Seems more like local calculator, because ratio[] array is local to this code module and mainwindow.C does not consult it for SAR - going purely by set display aspect ratio and dimensions. I looked at code at cinelerra/setformat.C and I am not sure how it works :) I will look at screenshots a bit later, now Fennec dog wants out (fireworks finally faded away) . > > > > The patch seems to work, as "guessed SAR/DAR" and "detected SAR/DAR" > > appear, but only in source1. In source2 (which is a 4k) there are > > neither, and in source3 and hdv.jpeg there is only "guessed SAR/DAR". > > > > The other 3 patches also seem to work since rendering bd.m2ts worked. > > > > https://postimg.cc/kDNqfpT0 > > https://postimg.cc/SJyq5f5J > > https://postimg.cc/VdD1cbQ4 > > https://postimg.cc/ctWZdRLk > > https://postimg.cc/tnzbJs1q > >
-- Cin mailing list Cin@lists.cinelerra-gg.org https://lists.cinelerra-gg.org/mailman/listinfo/cin
