> > Note, we do not talk about changing default globally, just about machinery > behind
Sorry, I misunderstood and thought you meant default for all instead of Andrey's packages. (I need to pay more attention to the details in the email.) FYI - I believe for Fedora 40, oneVPL is installed with the O/S by default BUT I had to install oneVPL-devel to build CinGG. but at 3am (GMT+3) I think we surely can stop holding our breath for same-minute answer ;) Andrew, I just send email when I happen to see it, hoping that you ignore it until the next day - I will endeavor to track time better. I did not looked at labels issue yet MatN will not be able to address the labels issue until Wednesday so we should probably wait until we hear back from him -- it may be an anomaly that may not be a bug due to some kind of interruption or it could just be a really esoteric bug. I did update the BT #666. On Mon, Dec 2, 2024 at 5:16 PM Andrew Randrianasulu <[email protected]> wrote: > > > вт, 3 дек. 2024 г., 02:42 Phyllis Smith <[email protected]>: > >> Well, yes, BUT the point is people have procedures set up to build this >> automatically for years and now all of a sudden they will have to install >> more software. Probably not a good idea. >> > > Note, we do not talk about changing default globally, just about machinery > behind > > https://github.com/einhander/cin-gg-packages/releases > > but at 3am (GMT+3) I think we surely can stop holding our breath for > same-minute answer ;) > > Good night, sorry I did not looked at labels issue yet > > >> On Mon, Dec 2, 2024 at 4:40 PM Andrew Randrianasulu < >> [email protected]> wrote: >> >>> >>> >>> вт, 3 дек. 2024 г., 02:36 Phyllis Smith <[email protected]>: >>> >>>> Unfortunately, it won't even build when I add: --with-onevpl on >>>> the configure line: >>>> configure: error: requires onevpl support. >>>> make: *** No targets specified and no makefile found. Stop. >>>> >>>> This is my 6 year old AMD laptop. >>>> >>> >>> you need to install >>> >>> https://github.com/intel/libvpl >>> >>> I used 2.13 for my dummy tests, but something down to 2.6 (I think) >>> should work, at least as build requirement. >>> >>> >>> >>> >>>>> >>>>> >>>>> >>>> On Mon, Dec 2, 2024 at 4:01 PM Terje J. Hanssen < >>>> [email protected]> wrote: >>>> >>>>> >>>>> Den 02.12.2024 23:32, skrev Phyllis Smith: >>>>> >>>>> Adding OneVPL by default, which only works on the latest Intel >>>>> computers and not on older ones or AMD, would not be a good idea; >>>>> especially not for the RPM packaging. That is my opinion based on our >>>>> attempt to keep CinGG generically usable on older computers and even >>>>> 32-bit >>>>> systems. >>>>> >>>>> >>>>> I didn't think "onevpl on" would prohibit other than Intel hardware to >>>>> work as else, and that hwaccell work or not, dependent of the platform >>>>> support. >>>>> Actually my thought was to test what legacy Intel hardware are good >>>>> for. Is possibly a Cingg user-switch possible instead? >>>>> >>>>> >>>>> >>>>> I have yet to go through the last 5 attachment patches that Andrew >>>>> graciously put all in one place for viability on all systems. >>>>> >>>>> On Mon, Dec 2, 2024 at 2:01 PM Terje J. Hanssen < >>>>> [email protected]> wrote: >>>>> >>>>>> >>>>>> >>>>>> >>>>>> Den 30.11.2024 01:03, skrev Andrew Randrianasulu: >>>>>> >>>>>> >>>>>> >>>>>> сб, 30 нояб. 2024 г., 01:07 Phyllis Smith via Cin < >>>>>> [email protected]>: >>>>>> >>>>>>> Andrew, should these and the QSV presets be checked into GIT now >>>>>>> that Terje has tested them on his specific hardware? >>>>>>> >>>>>> >>>>>> yes, but 10bit ones require patch for themselves and recent one >>>>>> removing addition of ildct flag for some qsv encoders .... >>>>>> >>>>>> >>>>>> "Exp: do not set ildct flag for qsv_av1/h264/vp9" >>>>>> 0001-yet-another-10bit-attempt.patch >>>>>> 0002-Hopefully-wire-up-various-cin_pix_fmt-for-vaapi-enco.patch >>>>>> >>>>>> re-attached so you do not need to hunt them in mailthreads .... >>>>>> >>>>>> >>>>>> >>>>>> Is the onevpl patch already included in the buildsystem? >>>>>> It was said it was "default to off", so I wonder if it will be >>>>>> available or "on" in the upcoming rpm? >>>>>> >>>>>> >>>>>> >>>>>> I also have mediacodec/termux related profiles, and one hackfix for >>>>>> mjpegtools failing to build here on clang. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> P.S. There will not be new Appimages created at the end of this >>>>>>> month, but will wait until December. >>>>>>> >>>>>>> >>>>>>> On Tue, Nov 26, 2024 at 3:52 PM Terje J. Hanssen < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Attached tested vaapi hwaccel presets as gzip'd tar file >>>>>>>> >>>>>>>> av1_vaapi_10b420.mp4 >>>>>>>> av1_vaapi_10b420.webm >>>>>>>> av1_vaapi_8b420.mp4 >>>>>>>> av1_vaapi_8b420.webm >>>>>>>> h264_vaapi_8b420.mp4 >>>>>>>> hevc_vaapi_10b420.mp4 >>>>>>>> hevc_vaapi_10b422.mp4 >>>>>>>> hevc_vaapi_8b420.mp4 >>>>>>>> vp9_vaapi_10b420.mp4 >>>>>>>> vp9_vaapi_10b420.webm >>>>>>>> vp9_vaapi_8b420.mp4 >>>>>>>> vp9_vaapi_8b420.webm >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>> Cin mailing list >>>>>>> [email protected] >>>>>>> https://lists.cinelerra-gg.org/mailman/listinfo/cin >>>>>>> >>>>>> >>>>>> >>>>>
-- Cin mailing list [email protected] https://lists.cinelerra-gg.org/mailman/listinfo/cin
