On Sun, 2007-18-03 at 17:24 +0100, Valentina Messeri wrote:
> :)
>
> >>
> >> # dvgrab
> >>
> >> 3)copy paste here what output
> >>
> > I actually ran some video, and when the camera was shut off I got this
> > response.
> >
> >> Reset Handler received
> >> "" 0.00 MB 0 frames
> >> Capture Stopped
> >> Error: no DV
>
> ok, well, something going wrong......
>
> I had similar problems using my camera, months ago....
>
> http://www.arcknowledge.com/gmane.comp.video.kino.devel/2006-06/msg00006.html
>
> In my case, next version of kino solved problems.....driver was not
> working properly....
>
I don't have the luxury of waiting around. I now have three projects
waiting to be edited and things are backing up.
>
> some tips:
>
> 1) try change firewire cable
>
I unplugged it and plugged it back in and now it won't even display
during capture. I'm going to shutdown and restart and see if that makes
a difference, and then try another ieee1394 socket on the card.
> 2) try to use another fire device (an hd, for example) to understand
> if problem is really your camera or ieee1394 port
No other devices, nor even a different cable available right now. I
don't think it's the cable, because until just a few moments ago, it was
at least displaying the video as it tried to capture, if not saving it.
The problem affects dvgrab also, although dvgrab never tries to display
anything, but there is no mention with dvgrab of where the file goes if
it does save it.
--
Warmest Regards,
Fred Williams
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
