Richard Spindler wrote:
2008/5/9 Jan Jockusch <[EMAIL PROTECTED]>:
I now have a ShuttlePro2. building c-cv cvs. where is this patch you
speak of?
Your dmesg looks fine. I've attached the patch. But I guess it won't work
out of the box.
To find out about your controller, please run 'aconnect -l -i' and see if
you can find your device.
You should also be able to find an according '/dev/snd/midiCxDx' device
node.
I think the Shuttle is detected as a HID (=Human Interface Device)
rather than a midi device. There is some kind of tool though that
translates the signals that a shuttle generates to midi. It was made
for ardour which can be controlled through midi too I think. it is
available here:
http://www.helsinki.fi/~stsavola/software/
looks reasonable...
[EMAIL PROTECTED]:~/src/sxpress/sxpress-0.1$ ./sxpress
/dev/input/event0: Permission denied
Error opening device
[EMAIL PROTECTED]:~/src/sxpress/sxpress-0.1$ sudo ./sxpress
[sudo] password for juser:
Device opened (Macintosh mouse button emulation)
turn nob, spin wheel, push buttons... don't see anything... now what?
Carl K
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
