Paul Stewart wrote:
> Hi folks... > > We're looking at an application whereby providing T1 services out to > customers... since we have a spare 7513 chassis kicking around it makes > sense to use it.... > > One concept is to put a pair of PA-T3+ cards into the chassis and connect > the T3's into a Telco Systems DS3 MUX - we're looking at 40-50 full rate T1 > customers some of which will be load balanced as well..... > > First question, will this work? Second question, the 7513 only has VIP2-50 > cards in it and I read some Cisco docs that state minimum RSP7000 series > processors and ours have RSP5000 series.... > > Looking for real-world feedback... other option is to just use 8 port T1 > cards (PA-MC-8T1) which seems like a safer bet at this point.... > > Thanks in advance, > > Paul This will work, allthough you will need a hacksaw. NAME: "Card Slot 2, Bay 0", DESCR: "Channelized DS3" PID: PA-CT3/4T1 , VID: Hardware Version : 1.3 Board Revision : B0, SN: 11027806 NAME: "Line Card 3", DESCR: "Versatile Interface Processor" PID: VIP2-50 , VID: Hardware Version : 2.02 Board Revision : C0, SN: 15373521 NAME: "Line Card 5", DESCR: "Versatile Interface Processor" PID: VIP2-50 , VID: Hardware Version : 2.02 Board Revision : D0, SN: 17087883 NAME: "Card Slot 5, Bay 0", DESCR: "Channelized DS3" PID: PA-CT3/4T1 , VID: Hardware Version : 1.3 Board Revision : B0, SN: 11029553 NAME: "RSP at Slot 6", DESCR: "R5000" PID: RSP4 , VID: Hardware Version : 1.0 Board Revision : A0, SN: 8194052 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
