Arie, Aggregation of frame and leased lines, some dot1q, and EIGRP for a routing protocol.
For hardware I'd fill them with PA-2T3+ and PA-MC-2T3+ adapters. On 4/17/07, Arie Vayner (avayner) <[EMAIL PROTECTED]> wrote: > Can you give a bit more info what you are planning to use the 7200 > router for? > Arie > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Sent: Tuesday, April 17, 2007 17:27 PM > To: [email protected] > Subject: [c-nsp] 7200 / NPE-G2 > > Does anyone have experience/feedback that they're willing to share on > the moderately new G2 engine ? I suspect that software is more of a > wild card than the hardware itself. Does anyone have an opinion on > whether one is better off with 12.4.11T or 12.2SB ? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
