I'm having trouble setting up nat on a router. I have a route-map routing internal subnets to various dsl lines. We have another isp connection now that I need to connect to the router on an hwic and setup nat. I have a workstation that i'm trying to route through to the new isp connection but having some trouble with the nat config.
Route map "inet" is used to route the internal subnets on the network to various dsl lines. f0/0 is the lan port, f0/1 is the wan port where the 827 dsl routers are connected to and f0/3/3 on the hwic is where the new isp connection is on vlan 303. interface FastEthernet0/0 description lan bandwidth 100000 ip address 10.1.10.1 255.255.255.0 ip route-cache flow ip policy route-map inet duplex auto speed auto ! interface FastEthernet0/1 description wan - connects to a switch where four dsl lines are connected ip address 10.10.50.1 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/3/0 ! interface FastEthernet0/3/1 ! interface FastEthernet0/3/2 ! interface FastEthernet0/3/3 description isp connection that i'm trying to setup nat on switchport access vlan 303 ! interface Vlan303 bandwidth 3000 ip address 64.x.x.2 255.255.255.240 secondary ip address 64.x.x.1 255.255.255.240 ip nat outside ! ip classless ip route 10.20.0.0 255.255.255.0 10.10.50.101 ip route 10.50.0.0 255.255.0.0 10.1.10.20 ip route 192.168.0.0 255.255.0.0 10.1.10.20 ip flow-export source FastEthernet0/0 ip flow-export version 5 ip flow-export destination 192.168.25.31 2055 ! ip nat inside source route-map nat-wb interface FastEthernet0/3/3 overload ! ip access-list extended pjh permit ip 192.168.18.0 0.0.0.255 any ip access-list extended ees permit ip 192.168.6.0 0.0.0.255 any ip access-list extended ges permit ip 192.168.7.0 0.0.0.255 any ip access-list extended rtest permit ip host 192.168.50.54 any ! snmp-server community public RO ! route-map inet permit 40 match ip address ges set ip next-hop 10.10.50.103 ! route-map inet permit 50 match ip address pjh set ip next-hop 10.10.50.103 ! route-map inet permit 60 match ip address ees set ip next-hop 10.10.50.102 ! route-map inet permit 303 match ip address rtest set ip next-hop 64.x.x.3 ! route-map nat-wb permit 10 match ip address rtest match interface FastEthernet0/3/3 ! I know it is a nat problem, but what am i missing? Thanks, Dan. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
