I must be missing something simple with v6 autoconfig - last time I did this was with a 7200 and Solaris.
On a 6500 running 12.2(18)SXD7, I have something like: interface Vlan5 ip address 163.245.209.2 255.255.255.128 ip access-group in-vlan5 out no ip redirects ipv6 address 2001:1470:1F01:3521:1:1:1:1/96 ipv6 enable glbp 10 ip 163.245.209.1 glbp 10 priority 200 glbp 10 preempt end I have a Linux box attached to that network and in /etc/sysconfig/network I have: NETWORKING_IPV6=yes IPV6_AUTOCONF=yes eth1 comes up with a link-local address and I'm able to ping6 the link-local address for Vlan5 however it doesn't get a global address. I changed ifcfg-eth1 to look like the following to verify v6 connectivity and it works but I'd really like to get autoconfig working. Any pointers? DEVICE=eth1 ONBOOT=yes HWADDR=00:50:56:A9:07:F0 BOOTPROTO=static IPADDR=163.245.209.8 NETMASK=255.255.255.128 IPV6INIT=yes IPV6ADDR=2001:470:1F01:3521:1:1:1:3/96 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
