If you are just bridging a VLAN, do you need an IP on the BVI ? I assume not.
...Skeeve -----Original Message----- From: Chris Hale [mailto:[EMAIL PROTECTED] Sent: Thursday, 14 June 2007 2:48 AM To: [EMAIL PROTECTED]; [email protected] Subject: RE: [c-nsp] Bridging dot1q on a 7200 Create a bridge group and terminate the IP in a BVI interface. bridge irb bridge 1 protocol ieee Int FastEthernet4/0.14 encapsulation dot1Q 14 no cdp enable bridge-group 1 interface FastEthernet0/0.14 encapsulation dot1Q 14 no cdp enable bridge-group 1 interface BVI1 ip address 1.2.3.4 255.255.255.224 BVI interface number must match the bridge-group you use on the sub interfaces. Chris _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
