On Tue, 26 Jun 2007, Pelle wrote: > On Tue, Jun 26, 2007 at 11:16:39PM +0300, Hank Nussbacher wrote: > >> Where can I find a Cisco page that shows which IOS versions that >> support switchport capability (specifically for 871, 1841, 2501, 2514 >> and 2610)? > > 871: yes for the LAN-ports, no for the WAN port > 1841: yes, if equipped with a EtherSwitch-module, e.g. WIC-4ESW or > HWIC-4ESW > 25xx: no > 2610: maybe, if equipped with the EtherSwitch-module WIC-4ESW and it's > supported (don't know that) > > in general, all (H)WIC's which are branded as "Ethernet Switching > module" does "switchport". in addition the routers in the 87x series and > 180x is shipped with this module integrated.
Thanks! That helped a lot. Too bad there is no Cisco page which details all router models and their support of switchport as you did above. -Hank > > BUT, the Vlan-range supported are the old ISL-range (1-1005). if you use > a pre 12.4(11)T IOS, all Vlans are configured in the ancient Vlan > database. from 12.4(11)T transparent mode is supported. > > -- > pelle > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
