> > Hi all, > > I want to know is there any way to have my old WS-C3524-XL-EN > to allow 802.1X ? > If there are no way to enable this switch to allow dot1x, maybe I have > to look for another switch. >
It supports both ISL and dot1q: interface GigabitEthernet0/1 description Trunk to XXX switchport trunk encapsulation dot1q switchport mode trunk ! Config t (confi)#int g0/1 (confi)#switchport trunk encapsulation ? dot1q Interface uses only 802.1q trunking encapsulation when trunking isl Interface uses only ISL trunking encapsulation when trunking _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
