Thanks... We already run netflow and collect data ..... Everything we have today is open source.... But none of it talks to one another.... Running into scalability issues....
Thanks, Paul -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roland Dobbins Sent: Saturday, July 07, 2007 11:41 PM To: Cisco-NSP Mailing List Subject: Re: [c-nsp] ISP Network Monitoring/Helpdesk/Workflow Automation On Jul 8, 2007, at 9:34 AM, Paul Stewart wrote: > And I'm looking for a way to monitor them (with thresholds, alarms, > escalations, etc) In terms of traffic utilization and heuristics, enable NetFlow, collect it with nfdump, and graph it with nfsen. NetFlow gives extremely useful visibility into your traffic for billing, troubleshooting, capacity planning, traffic engineering, and security. There are good commercial apps, too, but start with open source - great cost/benefit ratio, and you'll learn a lot, too. ;> ----------------------------------------------------------------------- Roland Dobbins <[EMAIL PROTECTED]> // 408.527.6376 voice Culture eats strategy for breakfast. -- Ford Motor Company _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
