I'm seeing the following errors on one of my WIC modules: 000342: Jul 9 03:58:01.683: %SERVICE_MODULE-4-WICNOTREADY: Unit Serial0/1/0 not ready for next command -Traceback= 0x41173B5C 0x40371894 0x40371DFC 0x40369AF0 0x40369DB4 0x4036DDAC 0x4036E9E8 0x411B2DF0 0x411CEB64 0x42522ECC 0x42515C0C 0x42183F44 0x42183F28
000343: Jul 9 03:58:01.687: %SERVICE_MODULE-4-REQUESTOVERLOAD: Unit Serial0/1/0 - module request overload - lock access timeout -Traceback= 0x41173B5C 0x40369AAC 0x4036EF14 0x4036A22C 0x4036A9E4 000344: Jul 9 03:58:01.687: %SERVICE_MODULE-4-ALARMFAILURE: Unit Serial0/1/0 - Could not access alarm status - disabling alarm processing Any ideas? ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
