400Mbps is the connection speed between the RSM and the switch. 150Mbps is close to the performance limit.
If your design permits, you can run more than 1 RSM and split the routing up. Otherwise, you're better off setting up a router-on-a-stick like Gert suggested. Jason Alert VC3 Inc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Troy Beisigl Sent: Thursday, August 09, 2007 5:29 PM To: [email protected] Subject: [c-nsp] Catalyst 5500 RSM speed limitations. Does anyone know what the total bandwidth limitations are on the WS-X5302? I know that the chassis reports that it can do 400Mbps, but I am seeing packet loss and high latency when pushing 150Mbps on it. Aside from moving to a more current platform, are there any other RSM modules that can handle more than what this one can? Troy Beisigl Network Director I2B Networks, Inc 858-715-8500 X 1005 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
