Hi, since you use a 5510 - perhaps its an license issue? Base license only supports 3 physical interfaces, according to
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/specs.html#wp1154752 Not sure how the SSM fits into the license picture. At least a show version should tell you if the card is installed/detected by the asa. If not, consider an software upgrade, I remeber that when we installed the SSM, a firmware update to the module happened (5540 running 7.2(2)). Christian _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
