If you only need to dial into one of the devices, any router with an AUX port will work, and then you can use the local network to access other devices. If I were you though, I'd wire up console access to each device individually from some aggregator, like a 2511. There are also other 3rd party serial console devices that work from companies like Raritan, etc. but they aren't going to be as cheap as an old 2511 or Portmaster.
Phil On Sep 2, 2007, at 9:33 AM, Paul Stewart wrote: > Hi folks... > > Looking for feedback on what still works well for console access via a > router dial-up? > > We have quite a few sites that have several routers/switches/access > devices > all of which have console/serial connections on them.... We'd like > to be > able to dial-up to a router onsite and then connect to all the > other devices > for out of band control..... We don't want to connect a phone line > directly > via mdoem to each device of course... > > Cisco 2511 comes to mind but hoping for something current.... > > Thanks, > > Paul > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
