Hi Jeff, While you can do this on the 6500, I don't believe the equivalent exists for the 5500 (it's port-ASIC specific).
See: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/command/reference/S1.html#wp1320204 if you're still interested in the 6500 functionality (note there are some interesting caveats in regards to how ASICs may be shared between groups of ports). Regards, ~Aaron On 10/12/07, Jeff Crowe <[EMAIL PROTECTED]> wrote: > Hi all, > > I have a catalyst 5500 with a trunk port setup doing dot1q and 3 vlans > coming into that port (eg: 3,95,199). I need to take one of those vlans that > comes in (199) and change it to be vlan 48. Vlan 48 exists on the switch > already. > > Is there a way to re-write the vlan information so I can change vlan 199 in > this example to vlan 48 without having to create two access ports and put a > cross over between them? > > Thanks, > > Jeff > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
