Hi all, I have a catalyst 5500 with a trunk port setup doing dot1q and 3 vlans coming into that port (eg: 3,95,199). I need to take one of those vlans that comes in (199) and change it to be vlan 48. Vlan 48 exists on the switch already.
Is there a way to re-write the vlan information so I can change vlan 199 in this example to vlan 48 without having to create two access ports and put a cross over between them? Thanks, Jeff _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
