Hi! On Fri, Oct 12, 2007 at 11:04:44AM -0400, Aaron Daubman writes: AD> While you can do this on the 6500, I don't believe the equivalent AD> exists for the 5500 (it's port-ASIC specific).
AD> See: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/command/reference/S1.html#wp1320204 AD> if you're still interested in the 6500 functionality (note there are AD> some interesting caveats in regards to how ASICs may be shared between AD> groups of ports). When I try to setup vlan mapping on 6500 with WS-X6148A-GE-TX it works, but I have ~0.3% packets loss on simple ping. Changing vlan mapping to bridge solves the problem, but it use MSFC. Experiments is clean, turning on vlan mapping gives 0.2-0.3% packets lost, without vlan mapping there's no losses (with or without bridge). 12.2(18)SXF8. Any suggestions, or should I forget about vlan mapping on 6148A? -- Pavel _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
