Hi lists, I'm trying load the c2800nm-advipservicesk9-mz.124-15.T1.bin image into Cisco2821, in accordance to Cisco WebPage the RAM and Flash required are: 256/64, my chassis has:
Cisco 2821 (revision 53.51) with 249856K/12288K bytes of memory. Processor board ID FTX1115A1MX 2 Gigabit Ethernet interfaces 2 Serial(sync/async) interfaces DRAM configuration is 64 bits wide with parity enabled. 239K bytes of non-volatile configuration memory. 62720K bytes of ATA CompactFlash (Read/Write) and c2800nm-advipservicesk9-mz.124-15.T1.bin is almost 50MB, but when I loaded the image I have an error: GigabitEthernet0/0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! %Error copying flash:c2800nm-advipservicesk9-mz.124-15.T1.bin (No space left on device) Why appear this error if I have enough space in my device? any suggestion will be appreciated Rgds. -- Omar E.P.T ----------------- Certified Networking Professionals make better Connections! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
