Hi all, I erased the flash and rebooted the router after reset I tried load the IOS in rommon mode, unfortunately the load didn't complete, I tried again and failed again, I thought tftp failure because I get TFTP timeout:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!..!!!!.!!!!.!!!!.!!!.!.!!.!..!.!!.!!.!..!!.................. [TIMED OUT] TFTP: Operation terminated. After that I think that my flash memory is incorrect, how can I know if my flash is working well, or maybe is not working anymore!? Thanks for your response... PD. At this moment, my router is in rommon mode, and I don't know troubleshooting my flash... On 10/18/07, Jonathan Charles <[EMAIL PROTECTED]> wrote: > > Well, build a tarball of your IOS and CME files and just archive tar > /extract it to the flash > > > > Jonathan > > On 10/18/07, Adrian Chadd <[EMAIL PROTECTED]> wrote: > > On Thu, Oct 18, 2007, Jonathan Charles wrote: > > > Issue a format flash: > > > > > > It takes about 2 seconds and wipes it clean... > > > > > > Besides, no one uses SDM anyway... > > > > "oh crap all of my CME files are gone!" > > > > Its generally fine to start with, but then strange crap happens. Phones > > don't ring right, new phones don't get updated firmware, ATAs stop > working, > > etc. Then you swear. Loudly. :) > > > > (And squeeze flash isn't supported everywhere iirc.) > > > > > > > > Adrian > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Omar E.P.T ----------------- Certified Networking Professionals make better Connections! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
