Howard Leadmon wrote: >> On Mon, 29 Oct 2007, Adrian Minta wrote: >> You will always be on the edge. C3550 was a better switch than C3560 IMHO. >> >> -- >> Best regards, >> Adrian Minta >> > > > I am curious why you feel the 3550 is better than the 3560? Any factual > reason, or just a matter of personal preference for some reason. > > I have a 3560G, and it's been running like a champ a long time.. > > > --- > Howard Leadmon >
I replaced a 3550 non G with 3560 non G. The config was the same (copy & paste). On 3550 average CPU load was below 1%. On 3560 the load was always above 5% with spikes up to 60%. After some googling I change the sdm template. The load went down, but above 5%. I put extensive ACL's on all the routed port and finally CPU stabilized to around 5%. The load is caused by "IP Input" and "HL3U bkgrd". My feeling is that C decided to discourage the use of c3560 for routing and somehow they reduce the switch fabric. -- Best regards, Adrian Minta _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
