Hello , I just trying to understand can Cisco CSM work as a basic router, eg can servers from two vlans , configured as SERVER vlans communicate with each other ?
configuration is fairly basic, module contentswitchingmodule 7 vlan 604 client ip address 192.168.0.1 255.255.255.224 gateway 192.168.0.254 ! vlan 606 server ip address 10.100.119.250 255.255.255.0 vlan 607 server ip address 10.101.120.250 255.255.255.0 seems to servers from vlan 606 and 607 cannot communicate with each other. they can ping their gateway (.250) and even ip address of csm 192.168.0.1 but cannot reach each other. May be I miss something ? Cisco , however , mention in "Networking with the Content Switching Module" in section "CSM Inline, MSFC on Client Side" Server-to-server Layer 3 communications pass through the CSM. This means servers CAN communicate through CSM. -- Best regards, Andriy A. Yerofyeyev. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/