On Tue, Dec 18, 2007 at 12:30:23PM -0000, Mohamed Ahmad wrote: > Hi guys, > > I was wondering what was the effect of disabling "soft-reconfiguration > inbound" on our neighbor statement with our provider (basically a live > network). I was looking at the ram usage and it's been going up slowly. We > currently receive full table from our provider but filter to get only > default (I know we can get them to just send a default but we might remove > filter in the future to get full routes on an upgraded router). Any ill > effects of removing the "soft-reconfiguration inbound"?
>From what I recall none other than not being able to see the prefiltered copy of the feed you get from the peer. And it allowed you to do a soft clear so you didn't have to reset the entire peer session. Rodney > > Many thanks, > > > > > Registered Company No.: 4206916 > VAT No.: GB 774 2593 02 > > > > This message is for the designated recipient only and may contain > privileged, proprietary, or otherwise private information. If you have > received it in error, please notify the sender immediately and delete the > original. Any other use of the email by you is prohibited. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
