I have had experienced that sometime BGP session goes down/up if you add or remove "soft-reconfiguration inbound". I will try to check this tonight if I get time.
Regards, Masood Ahmad Shah -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Rathlev Sent: Tuesday, December 18, 2007 7:29 PM To: [email protected] Subject: Re: [c-nsp] BGP soft reconfiguration inbound On Tue, 2007-12-18 at 12:30 +0000, Mohamed Ahmad wrote: > Hi guys, > > I was wondering what was the effect of disabling "soft-reconfiguration > inbound" on our neighbor statement with our provider (basically a live > network). I was looking at the ram usage and it's been going up slowly. We > currently receive full table from our provider but filter to get only > default (I know we can get them to just send a default but we might remove > filter in the future to get full routes on an upgraded router). Any ill > effects of removing the "soft-reconfiguration inbound"? > > Many thanks, This shouldn't reset your BGP session, so you should be able to do it on a live network. I've only tested it on our CE-boxes (C3560) so I don't know for sure though. Regards, Peter Rathlev _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
