-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I thought tunnel recirculation was added automagically now when the box boots if it thinks its gonna have a problem based on h/w config?
Dave. Jared Mauch wrote: | On Wed, Jan 16, 2008 at 05:52:39PM +0000, David Freedman wrote: |> |> > MPLS path seems good end-to-end - 'no mpls ip propagate-ttl local' shows |> > the traceroute drop to one hop, both endpoints show the two core routers |> > as LDP neighbors, both sides have 'send-community extended' on the BGP |> > neighbor sessions, receive ACLs have been opened. 'sh ip ro vrf <name>' |> > shows the routes with correct (global) next-hops. |> |> So I take it you have traced the LSPs between the next hops end to end |> in both directions to verify they are not broken? | | You may also need to add this (global) command: | | mls mpls tunnel-recir | | I wouldn't go pushing it everywhere unless it actually fixes | a problem for you though. | | - Jared | - -- David Freedman Group Network Engineering Claranet Limited http://www.clara.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHjlYctFWeqpgEZrIRAv8fAJ4lAua+2+cHVREsz6jdWzdArEsg5wCeI+y0 jfPCv+cfgfO0rbjIrhATNxg= =+3Ut -----END PGP SIGNATURE----- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
