The CPU just started spiking on my Cat6509 running 12.2(18)SXF9 IP Services. The process ios-base is running at 99%. What could this be. I can't find anything on Google or on CCO.
Cat6509e-r1#sh proc cpu CPU utilization for five seconds: 100%; one minute: 99%; five minutes: 99% PID 5Sec 1Min 5Min Process 1 0.1% 0.4% 0.4% kernel 3 0.0% 0.0% 0.0% qdelogger 4 0.0% 0.0% 0.0% devc-pty 5 0.0% 0.0% 0.0% devc-mistral.proc 6 0.0% 0.0% 0.0% pipe 7 0.0% 0.0% 0.0% dumper.proc 4104 0.0% 0.0% 0.0% bflash_driver.proc 12297 0.0% 0.0% 0.0% pcmcia_driver.proc 12298 0.0% 0.0% 0.0% mqueue 12299 0.0% 0.0% 0.0% flashfs_hes.proc 12300 0.0% 0.0% 0.0% dfs_bootdisk.proc 12301 0.0% 0.0% 0.0% ldcache.proc 12302 0.0% 0.0% 0.0% watchdog.proc 12303 0.0% 0.0% 0.0% syslogd.proc 12304 0.0% 0.0% 0.0% name_svr.proc 12305 0.0% 0.0% 0.0% wdsysmon.proc 12306 0.0% 0.0% 0.0% sysmgr.proc 16386 0.0% 0.0% 0.0% chkptd.proc 16403 0.0% 0.0% 0.0% sysmgr.proc 16404 0.0% 0.0% 0.0% syslog_dev.proc 16405 0.0% 0.0% 0.0% itrace_exec.proc 16406 0.0% 0.0% 0.0% packet.proc 16407 0.0% 0.0% 0.0% installer.proc 16408 98.2% 97.2% 97.0% ios-base 16409 0.0% 0.0% 0.0% fh_fd_oir.proc 16410 0.0% 0.0% 0.0% fh_fd_cli.proc 16411 0.0% 0.0% 0.0% fh_metric_dir.proc 16412 0.0% 0.0% 0.0% fh_fd_snmp.proc 16413 0.0% 0.0% 0.0% fh_fd_none.proc 16414 0.0% 0.0% 0.0% fh_fd_intf.proc 16415 0.0% 0.0% 0.0% fh_fd_gold.proc 16416 0.0% 0.0% 0.0% fh_fd_rf.proc 16417 0.0% 0.0% 0.0% fh_fd_counter.proc 16418 0.0% 0.0% 0.0% fh_fd_timer.proc 16419 0.0% 0.0% 0.0% fh_fd_ioswd.proc 16420 0.0% 0.0% 0.0% fh_server.proc 16421 0.0% 0.0% 0.0% fh_policy_dir.proc 16422 0.0% 0.0% 0.0% ipfs_daemon.proc 16423 0.2% 0.1% 0.1% raw_ip.proc 16424 0.0% 0.0% 0.0% inetd.proc 16425 0.7% 0.8% 0.8% tcp.proc 16426 0.2% 0.1% 0.1% udp.proc PID 5Sec 1Min 5Min Process 16427 0.0% 0.0% 0.0% iprouting.iosproc 16428 0.4% 0.4% 0.3% cdp2.iosproc Here's my hardware (serial numbers removed) waflnapcore-r1#sh module Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX 5 2 Supervisor Engine 720 (Active) WS-SUP720-3B 6 2 Supervisor Engine 720 (Hot) WS-SUP720-3B 9 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 001b.2ad3.3798 to 001b.2ad3.37c7 2.6 12.2(14r)S5 12.2(18)SXF9 Ok 5 0017.9444.c15c to 0017.9444.c15f 5.4 8.4(2) 12.2(18)SXF9 Ok 6 001a.2f3b.f8e0 to 001a.2f3b.f8e3 5.4 8.4(2) 12.2(18)SXF9 Ok 9 0012.dafe.720a to 0012.dafe.7211 2.3 5.4(2) 8.5(0.46)RFW Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 Centralized Forwarding Card WS-F6700-CFC XXXXXXXXXXX 3.1 Ok 5 Policy Feature Card 3 WS-F6K-PFC3B XXXXXXXXXXX 2.3 Ok 5 MSFC3 Daughterboard WS-SUP720 xxxxxxxxxxx 3.0 Ok 6 Policy Feature Card 3 WS-F6K-PFC3B XXXXXXXXXXX 2.3 Ok 6 MSFC3 Daughterboard WS-SUP720 XXXXXXXXXXX 3.0 Ok Thanks for your help in advance. Patrick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
